View G057NV01V0_2083728.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

g057vn01 v0 ver. 0.2 1/22 g057vn01 v0 preliminary specification final specification module 5.7 inch color tft-lcd model name g057vn01 v0 customer date checked & approved by note: this specification is subject to change without notice. approved by date debbie chiu 2008/08/04 prepared by david hsing 2008/07/20 general display business division / au optronics corporation www..net
g057vn01 v0 ver. 0.2 2/22 g057vn01 v0 contents 1. operating precautions ........................... ................................................... .......4 2. general description............................. ................................................... ..........5 2.1 display characteristics........................ ................................................... ............................5 2.2 optical characteristics ........................ ................................................... ............................6 3. functional block diagram........................ ................................................... .....8 4. absolute maximum ratings ........................ ................................................... ..9 4.1 absolute ratings ............................... ................................................... ..............................9 4.2 absolute ratings of environment ................ ................................................... ....................9 5. electrical characteristics ...................... ................................................... ......10 5.1 tft-lcd driving ................................ ................................................... ...........................10 5.2 backlight unit driving ......................... ................................................... ........................... 11 6. signal characteristic ........................... ................................................... ........12 6.1 pixel format image ............................. ................................................... ..........................12 6.2 scanning direction ............................. ................................................... ...........................12 6.3 the input data format .......................... ................................................... ........................13 6.4 tft- lcd interface signal description.......... ................................................... ................14 6.5 tft- lcd interface timing ...................... ................................................... ......................15 6.6 led backlight unit interface signal description ................................................... ...........16 6.7 power on/off sequence .......................... ................................................... ..................16 7. connector & pin assignment...................... ................................................... 17 7.1 tft- lcd signal (cn1): lcd connector ........... ................................................... ...........17 7.2 led backlight unit (cn2): backlight connector.. ................................................... ..........17 7.3 pin 1 definition of cn1 and cn2 ................ ................................................... ..................18 8. reliability test criteria ....................... ................................................... .........18 9. mechanical characteristics...................... ................................................... ...20 10. label and packaging ............................ ................................................... .....21 10.1 shipping label (on the rear side of tft-lcd di splay) ............................................. ......21 10.2 carton package ................................ ................................................... ..........................21 11 safety.......................................... ................................................... .................22 11.1 keen edge requirements ........................ ................................................... ...................22 11.2 materials ..................................... ................................................... .................................22 11.3 capacitors .................................... ................................................... ...............................22 11.4 national test lab requirement ................. ................................................... ..................22 www..net
g057vn01 v0 ver. 0.2 3/22 g057vn01 v0 record of revision version and date page old description new description remark 0.1, nov.09, 2007 all first edition preliminary specifications 5 typical power consumption 2.11w (lcd:0.69w/led blu: 1.42w) weight: 200g (typ.), 220g (max.) typical power consumption 1.96w (lcd:0.46w/led blu: 1.5w) weight: 155g (typ.), 170g (max.) section 2.1 6 revise optical characteristics section 2.2 9 absolute ratings i f : max.=30ma v r : max.= no definition i r : max.= no definition absolute ratings i f : max.=20ma v r : max.=5v i r : max.=10 0a section 4.1 10 power specification idd: typ.=210ma, max.= no definition pdd: typ.=0.69w, max.= no definition power specification idd: typ.=140ma, max.=155ma pdd: typ.=0.46w, max.=0.51w section 5.1.1 11 parameter guideline for led i f : max.= no definition v f : typ.= 32.8v (i f =15ma, ta=-30 o c) v f : typ.=31.6v, max.= tbd (i f =15ma, ta=25 o c) v f : typ.=32.4v (i f =15ma, ta=85 o c) operating life: min.=20000 hrs, max.=40000 hrs parameter guideline for led i f : max.=20ma v f : typ.= 35.0v (i f =15ma, ta=-30 o c) v f : typ.=33.5v, max.= 40 (i f =15ma, ta=25 o c) v f : typ.=32.6v (i f =15ma, ta=85 o c) operating life: min.=25000 hrs, max.=50000 hrs section 5.2.1 17 lcd connecter manufacture: hirose or compatible mating connecter model number: fh12-33s-0.5sh (55) lcd connecter manufacture: starconn or compatible mating connecter model number: 089h33-000100-g2-r section 7.1 17 backlight connecter manufacture: jst or compatible connecter model number: shlp-06v-s-b or compatible pin #4 color: blue pin #5 color: white backlight connecter manufacture: stm or compatible connecter model number: p24021p6 or compatible pin #4 color: white pin #5 color: blue section 7.2 0.2, july.20, 2008 21 carton package max. capacity: no definition max. weight: no definition carton package max. capacity: 60 pcs tft-lcd module per carton max. weight: 12.65 kg per carton section 10.2 www..net
g057vn01 v0 ver. 0.2 4/22 g057vn01 v0 1. operating precautions 1) display area (polarizer) of tft-lcd module is ea sily to be damaged, please be cautious and not to scratch it. 2) be sure to power off your machine before connect ing or disconnecting your signal cable to tft-lcd module. 3) wipe off water drop on display area immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with a bsorbent cotton or soft cloth. 5) display area (glass) of tft-lcd module may be br oken or cracked if bump module against hard object. 6) to avoid esd (electro static discharde) damage, be sure to ground yourself before handling tft-lcd module. 7) do not open nor modify the tft-lcd module assemb ly. 8) do not press the reflector sheet at the back of the module to any direction. 9) in case if tft-lcd module has to be put back int o the packing container slot after it was taken out from the container, do not press the center of the led reflector edge. instead, press at the far ends of the led reflector edge softly. otherwis e the tft-lcd module may be damaged. 10) when inserting or removing of your signal cable to tft-lcd module, be sure not to apply abnormal force (rotate, tilt?etc.) to the connector of the tft-lcd module. 11) tft-lcd module is not allowed to be twisted & b ent even force is added on module in a very short time. please design your display product well to avoid external force applying to module by end-user directly. 12) small amount of materials without flammability grade are used in the tft-lcd module. the tft-lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied exemptio n. 13) severe temperature condition may result in diff erent luminance, response time. 14) continuous operating tft-lcd module under high temperature environment may accelerate led light bar exhaustion and reduce luminance drama tically. 15) the data on this specification sheet is applica ble when tft-lcd module is placed in landscape position. 16) continuous displaying fixed pattern may induce image sticking. it?s recommended to use screen saver or moving content periodically if fixed patte rn is displayed on the screen. www..net
g057vn01 v0 ver. 0.2 5/22 g057vn01 v0 2. general description g057vn01 v0 is designed for industrial display appl ications with vga (640 x rgb x 480) resolution and 262k colors (rgb 6-bits). it is composed of a t ft-lcd panel, driver ics, control and power supply circuits board and backlight unit. g057vn01 v0 offers cmos interface for display signal input. led driving board for backlight unit is not included. 2.1 display characteristics the following items are g057vn01 v0 characteristics summary at 25 (room temperature). items unit specifications screen diagonal inch 5.7 active area mm 115.2(h) x 86.4(v) pixels h x v 640 x 3(rgb) x 480 pixel pitch mm 0.18 x 0.18 pixel arrangement r.g.b. vertical stripe display mode tn, normally white nominal input voltage vdd volt 3.3 typ. typical power consumption watt 1.96w (lcd:0.46w/led blu: 1.5w) all black pattern weight grams 155g (typ.), 170g (max.) physical size mm 144.0(h)x 104.6(v) x 12.3(d) (typ.) electrical interface cmos 6-bit parallel rgb surface treatment anti-glare, hardness 3h support color 262k colors the most suitable view angle 12 o?clock temperature range operating storage (non-operating) o c o c -30 to +85 -30 to +85 rohs compliance rohs compliance www..net
g057vn01 v0 ver. 0.2 6/22 g057vn01 v0 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature). item unit conditions min. typ. max. remark white luminance cd/m2 i f = 15ma / 1 led line (center point) 300 400 - note 1 uniformity % 5 points - 1.3 note 1, 2, 3 contrast ratio 500 800 - note 4 msec rising - 15 20 msec falling - 10 15 response time msec rising + falling - 25 35 note 5 degree degree horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle degree degree vertical (upper) cr = 10 (lower) 60 60 70 70 - - note 6 white x 0.263 0.313 0.363 white y 0.279 0.329 0.379 red x 0.510 0.560 0.610 red y 0.280 0.330 0.380 green x 0.275 0.325 0.375 green y 0.535 0.585 0.635 blue x 0.100 0.150 0.200 color / chromaticity coordinates (cie 1931) blue y 0.055 0.105 0.155 color gamut % - 50 - note 1: measurement method equipment pattern generator, power supply, digi tal voltmeter, luminance meter (sr_3 or equivalent) aperture 1 with 50cm viewing distance test point center environment < 1 lux lcd module sr_3 or equivalent measuring distance module driving equipment www..net
g057vn01 v0 ver. 0.2 7/22 g057vn01 v0 note 2: definition of 5 points position (display ac tive area: 115.2mm(w) x 86.4mm(h)) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 3: the luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition. note 4: definition of contrast ratio (cr): note 5: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from ?white? to ? black? (falling time) and from ?black? to ?white? (rising time), re spectively. the response time interval definition i s between 10% and 90% of amplitude. please refer to the figure as below. maximum brightness of five points w5 = m inimum brightness of five points contrast ratio (cr) = brightness @ ?white? state brightness @ ?black? state 100 90 10 0 % optical response white black white tf tr 90 10 0 optical response white black white tr www..net
g057vn01 v0 ver. 0.2 8/22 g057vn01 v0 note 6: definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over 180 horizontal and 180 vertical range. the 180 horizontal ( l , r ) and 180 vertical ( h , l ) range are illustrated as following figure. 3. functional block diagram the following diagram shows the functional block of the g057vn01 v0 color tft/lcd module. www..net
g057vn01 v0 ver. 0.2 9/22 g057vn01 v0 4. absolute maximum ratings 4.1 absolute ratings item symbol min max unit remark logic/lcd drive voltage vdd -0.3 +3.6 volt led forward current i f 0 20 ma led reverse voltage v r - 5 volt led reverse current i r - 100 a for each channel led 4.2 absolute ratings of environment item symbol min max unit remark operating temperature top -30 +85 note 1, 2 operation humidity hop 5 95 %rh note 1, 2 storage temperature tst -30 +85 note 1 storage humidity hst 5 95 %rh note 1 note 1: maximum wet-bulb should be 39 and no conden sa tion. note 2: only operation is guaranteed. optical perfo rmance should be evaluated at 25 only. www..net
g057vn01 v0 ver. 0.2 10/22 g057vn01 v0 5. electrical characteristics 5.1 tft-lcd driving 5.1.1 power specification symbol parameter min typ max units remark vdd logic/lcd drive voltage 3.0 3.3 3.6 volt idd vdd current - 140 155 ma all black pattern (vdd=3.3v, at 60hz) i rush lcd inrush current - - 1.5 a note 1 pdd vdd power - 0.46 0.51 watt all black pattern (vdd=3.3v, at 60hz) vddrp allowable logic/lcd drive ripple voltage - - 100 mvp-p all black pattern (vdd=3.3v, at 60hz) note 1: measurement condition: q3 ao6402 g d2 s d1 d5 d6 q3 ao6402 g d2 s d1 d5 d6 c1 1uf/16v c2 1uf/25v c3 0.01uf/25v f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (high to low) control signal (lcd module input) r2 1k +3.3v r1 47k r2 1k 90% 10% vdd rising time 0v 3.3v 0.5ms vdd www..net
g057vn01 v0 ver. 0.2 11/22 g057vn01 v0 5.1.2 signal electrical characteristics input signals shall be low or hi-z state when vdd i s off. parameter symbol min. typ. max. unit remarks high vih 0.7vdd - vdd volt logic input voltage for display signals low vil 0 - 0.3vdd volt high vih 0.7vdd - vdd volt input voltage for rl/ud low vil 0 - 0.3vdd volt 5.2 backlight unit driving 5.2.1 parameter guideline for led following characteristics are measured under stable condition using a led driving board at 25 (ro om temperature). symbol parameter min typ max unit remark i f led forward current - 15 20 ma ta = 25 o c - 35.0 - volt i f = 15ma, ta = -30 o c - 33.5 40 volt i f = 15ma, ta = 25 o c v f led forward voltage - 32.6 - volt i f = 15ma, ta = 85 o c p led led power - 1.5 - watt operating life 25000 50000 hrs i f = 15ma, ta = 25 o c note 1: ta means ambient temperature of tft-lcd mod ule. note 2: i f , v f are defined for one channel led. there are total t hree led channels (an1-ca1, an2-ca2, an3-ca3) in back light unit. see section 6.6 for led backlight unit interface signal description. note 3: if g057vn01 v0 module is driven by high cur rent or at high ambient temperature & humidity cond ition. the operating life will be reduced. note 4: operating life means brightness goes down t o 50% initial brightness. typical operating life ti me is estimated data. www..net
g057vn01 v0 ver. 0.2 12/22 g057vn01 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship between inp ut signal and lcd pixel format. 6.2 scanning direction the following figures show the image seen from the front view. the arrow indicates the direction of sc an. note 1: tft-lcd interface signal description is sho wn in section 6.4. www..net
g057vn01 v0 ver. 0.2 13/22 g057vn01 v0 6.3 the input data format this product displays 262,144 colors in terms of th e 64 grey levels on rgb respectively. the following table demonstrates the display of input data. www..net
g057vn01 v0 ver. 0.2 14/22 g057vn01 v0 6.4 tft- lcd interface signal description note 1: ?low? stands for 0v. ?high? stands for 3.3v . ?nc? stands for ?no connection?. www..net
g057vn01 v0 ver. 0.2 15/22 g057vn01 v0 6.5 tft- lcd interface timing 6.5.1 timing characteristics de mode only signal symbol min. typ. max. unit remark clock frequency (dotclk) 1/ t clock 23.9 25.2 34.2 mhz note1 period t h 770 800 1000 active t hd 640 horizontal section blanking t hb 130 160 360 t clock note1 period t v 516 525 570 active t vd 480 vertical section blanking t vb 36 45 90 t line note1 note 1: recommended frame rate is 60 hz. 6.5.2 input timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
g057vn01 v0 ver. 0.2 16/22 g057vn01 v0 6.6 led backlight unit interface signal description pin # symbol pin description 1 an1 channel 1 led anode 2 an2 channel 2 led anode 3 an3 channel 3 led anode 4 ca1 channel 1 led cathode 5 ca2 channel 2 led cathode 6 ca3 channel 3 led cathode 6.7 power on/off sequence vdd power, lcd interface signals and backlight on/o ff sequence are shown in the following chart. signa ls from any system shall be hi-z state or low level when vdd is off. power on/off sequence timing value parameter min. typ. max. units t1 0.5 - 10 ms t2 0 - 50 ms t3 0 - 50 ms t4 0 - 10 ms t5 200 - - ms t6 200 - - ms t7 500 - - ms on/off sequence should be applied to avoid abnormal function in the display. please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. www..net
g057vn01 v0 ver. 0.2 17/22 g057vn01 v0 7. connector & pin assignment 7.1 tft- lcd signal (cn1): lcd connector manufacturer starconn or compatible mating connecter model number 089h33-000100-g2-r or compatible pin# symbol pin# symbol pin# symbol 1 gnd 12 gnd 23 b3 2 dotclk 13 g0 24 b4 3 nc 14 g1 25 b5 4 nc 15 g2 26 gnd 5 gnd 16 g3 27 de 6 r0 17 g4 28 vdd 7 r1 18 g5 29 vdd 8 r2 19 gnd 30 r/l 9 r3 20 b0 31 u/d 10 r4 21 b1 32 nc 11 r5 22 b2 33 gnd 7.2 led backlight unit (cn2): backlight connector manufacturer stm or compatible connector model number p24021p6 or compatible mating connecter model number sm06b-shls-tf or compatible pin # symbol cable color pin # symbol cable color 1 an1 red 4 ca1 white 2 an2 red 5 ca2 blue 3 an3 red 6 ca3 black www..net
g057vn01 v0 ver. 0.2 18/22 g057vn01 v0 7.3 pin 1 definition of cn1 and cn2 8. reliability test criteria items required condition remark temperature humidity bias 40 /90%,300hr note 2 high temperature operation 85 ,300hr note 2 low temperature operation -30 ,300hr note 2 high temperature storage 85 ,300 hours note 2 low temperature storage -30 ,300 hours note 2 thermal shock test -20 /30 min ,60 /30 min ,100cycles note 2 hot start test 85 /1 hr (min.), power on/off per 5 minutes, repeat 5 times note 2 cold start test -30 /1 hr (min.), power on/off per 5 minutes, repeat 5 times note 2 shock test (non-operating) 50g,20ms,half-sine wave, (x, y, z) note 2 vibration test (non-operating) 1.5g, 10~200~10hz, sine wave, 30mins/axis, 3 direct ion (x, y, z) note 2 esd contact discharge: 8kv, 150pf(330 ) 1sec, 8 points, 25 times/point air discharge: 15kv, 150pf(330 ) 1sec, 8 points, 25 times/point note 1,2 attitude test operating: 14,000 ft, ramp: 2000 ft/min, 8hrs non-operating: 40,000 ft, ramp: 2000 ft/min, 24hrs note 2 note1: according to en61000-4-2 esd class b criteri a, some performance degradation is allowed. tft-lcd module is self-recoverable, no data lost and no hardware f ailures after test. www..net
g057vn01 v0 ver. 0.2 19/22 g057vn01 v0 note2: water condensation is not allowed for each test it ems. each test is done by new tft-lcd module. don?t use the same tft-lcd module repeatedly for reliability test. the reliability test is performed only to examine the tft-lcd module capability. to inspect tft-lcd module after reliability test, please store it at room temperature and room humidi ty for 24 hours at least in advance. www..net
g057vn01 v0 ver. 0.2 20/22 g057vn01 v0 9. mechanical characteristics www..net
g057vn01 v0 ver. 0.2 21/22 g057vn01 v0 10. label and packaging 10.1 shipping label (on the rear side of tft-lcd display) 10.2 carton package max. capacity: 60 pieces tft-lcd module per carton max. weight: 12.65 kg per carton outside dimension of carton: 520(l)mm* 340(w)mm* 25 0(h)mm www..net
g057vn01 v0 ver. 0.2 22/22 g057vn01 v0 11 safety 11.1 keen edge requirements there will be no keen edges or corners on the displ ay assembly that could cause injury. 11.2 materials 11.2.1 toxicity there will be no carcinogenic materials used anywhe re in the tft-lcd module. if toxic materials are us ed, they will be reviewed and approved by the responsible auo tox icologist. 11.2.2 flammability all components including electrical components that do not meet the flammability grade ul94-v1 in the tft-lcd module will complete the flammability rating except ion approval process. the printed circuit board will be made from materia l rated 94-v1 or better. the actual ul flammability rating will be printed on the printed circuit board. 11.3 capacitors if any polarized capacitors are used in the tft-lcd module, provisions will be made to keep them from being inserted backwards. 11.4 national test lab requirement the tft-lcd module will satisfy all requirements fo r compliance to ul 60950 (u.s.a. information techno logy equipment). www..net

▲Up To Search▲

Price & Availability of G057NV01V0

	To Download G057NV01V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .